Filter
Top Products
88
APPENDIX M: REMOTE VIEWING USING
INTERNET EXPLORER
Along with the DVR NetView remote client software, you can also view your system remotely using
Internet Explorer (version 7 or later recommended). Remote viewing through Internet Explorer
allows for viewing from up to three simultaneous connections.
NOTE: Remote vie
wing is only compatible with Internet Explorer. Mozilla Firefox, Opera, Safari
and other browsers are not supported.
To view your system using Internet Explorer:
1. Open Internet Explorer.
2. In the address bar, enter your system’s IP address or your
Digimerg
e DDNS domain followed by :7000 — for example,
http://192.168.1.1:7000 or http://
tomsmith1.ddns.digimerge.net
NOTE: You MUST include http:// in order to access your system.
NOTE: If you need help finding your sy
stem’s IP address, see “How
Do I Find My IP and MAC addresses?” on page 70.
3. Login with the user name admin, and your default system
password, 000000.
4. From the new page, click Web
Viewer (Use overlay). You
will need to install ActiveX in order to access live viewing.
5. Click the warning bar and select Install Ac
tiveX Control.
6. From the prompt, click Install. The page will refresh and
live
viewing will commence.
http://192.168.1.1:7000
Figure 46.0 Login (admin/000000)
F igu re 46 .1 C lick Web V iew er (U se Ove rlay)
Figure 46.2 Install ActiveX
Figure 46.3 Click Install
Figure 46.4 Remote viewing through Internet Explorer (images simulated)