Filter
Top Products
7
MOUSE CONTROL
The mouse is the primary control device for the system. To
connect a USB mouse:
• Connect a USB / PS/2 mouse to the USB port on the rear panel—
DO
NOT
connect the mouse to the USB port on the front panel. The USB
port on the front panel is strictly intended for data transfer.
1. Left-Button: While in a split-screen display mode,
double-click an individual channel to view it in full-screen;
double-click again to return to the split-screen display mode.
While navigating menus, click to select a menu option;
double-click to open the next menu.
2. Right
-Button:
Right-click anywhere on the screen to open the Virtual Remote; double-click anywhere
on the screen to return to the previous menu.
3. Scroll-Wheel: Move the scroll wheel up or down to increase/decr
ease the value of a selected menu
option.
Mouse Tips
When using the mouse, the ENTER and EXIT buttons appear in the top-right
corner of every menu window. When you change system settings and
configurations, click to confirm your changes.
Touch Panel Tips and Tricks
If using the Touch panel, you will often use the following
buttons when controlling the system:
• CLR:
Menus
: move cursor up;
Playback
: pause playback;
Live
viewing
: show/hide OSD; clear channel icons
• /:
Menus
: move cursor down;
Playback
: stop playback;
Live
viewing
: open Log menu
• / :
Menus
: move cursor left;
Playback
: increase reverse
playback speed;
Live viewing
: start/stop recording
• /:
Menus
: move cursor right;
Playback
: increase forward
playback speed;
Live viewing
: start/stop scheduled recording
• Press the MENU/ESC button to open the main menu AND close
windows/exit
NOTE: This manual refers to the CANCEL/ESC button on the remote control for closing/exiting menu windows. If
using the front panel, press MENU/ESC to close/exit menu windows.
• Press the button to increase values for selected menu options
• Press the button to decrease values for selected menu options
• Press the button to enter/confirm.
1 2
3