Filter
Top Products
8
PD-6
DVD Location Recorder
Precautions
Avoid excessive heat and humidity
Do not expose the PD-6 to extremes of humidity. Do not place the unit in direct
sunlight, close to heating units, or in areas subject to high temperatures. Also avoid
areas subject to extremely low temperatures.
The PD-6’s ambient operating temperature is between 0º and 45ºC.
Avoid excessive dust and vibration
Locations which are subject to excessive dust accumulation or vibration which could
cause mechanical damage.
Avoid physical shocks
Strong physical shocks can cause damage. Handle the unit with care.
Avoid damaging the power cord
Make certain that the PD-6’s power cord is not located in a position where it is likely
to be walked on or pinched by other equipment placed near the cord.
Clean with a soft dry cloth
Never use solvents such as benzine or thinner to clean the PD-6.
Wipe it clean with a soft dry cloth. If further cleaning is required, a lightly moistened
cloth with a mild detergent may be used.
Do not open the case or attempt repairs or modification yourself
The PD-6 contains no user-serviceable parts. For other than routine cleaning, refer
all maintenance to qualified FOSTEX service personnel.
To reduce the risk of electric shock, do not open the case. Opening the case and/or
tampering with the internal circuitry will void the warranty.
Precautions on safety
Precautions on installation
Do not install the unit in the following conditions
- in a extremely hot or cold place
- in a moist place
- in a dusty place
- in a strong magnetic field or near a device which generates a magnetic field
- in the direct sunshine
<Important!>
Equipment name, electrical ratings, serial
number and other information for the PD-6,
are written on bottom side.
MODEL PD-6
DVD LOCATION RECORDER
FOSTEX CO.
INPUT: 12VDC
SERIAL NO.
MADE IN JAPAN