Filter
Top Products
99
PD-6
DVD Location Recorder (Chapter 7: Setup mode)
Date
Option
Comment
Take
Up to 17 ASCII characters can be entered. The first character must be alphabetical.
Comment
001-999
Option
Comment
flashing
flashing
Default file name setting (Default file name)
When recording is made in the New File mode, a new file is created and a name is
given automatically.
The “Default file name” menu selects the name form of an audio file when it is
created between date information base and scene/take number information base.
On “Default file name” menu screen, you can select a desired file name mode, as well
as specify the default file name (scene name and the take number).
Only when setting the “File name mode” to “Take”, the cursor automatically moves
to the “SCENE NAME” field, then to the “TAKE NUMBER” field, allowing you to specify
them.
When the “File name mode” is set to “Take”, the name form of an audio file is “<SCENE
NAME> + <TAKE NUMBER>”. (The TAKE NUMBER is incremented automatically each
time a file is created.)
<File name mode>
The internal real-time clock data (with “.wav”, the file extension) is the file name.
Example: B05h 05m 06s 02jan 2003.wav
“<SCENE NAME> + <TAKE NUMBER>” (with “.wav”, the file extension) is the
file name. The TAKE NUMBER is incremented automatically each time a file is
created.
<SCENE NAME>
<TAKE NUMBER>
The selected TAKE NUMBER follows SCENE NAME.
The selected TAKE NUMBER is applied to the first file created.
<Note>
If you enter “000” to the TAKE NUMBER field, it is automatically set as “001”.