Filter
Top Products
108
PD-6
DVD Location Recorder (Chapter 8: Utility mode)
Editing a file name [Edit file name]
The “Edit File name” menu edits a file name of the currently loaded audio
file.
1. Select the “Edit file name ” menu and press the [ENTER] key.
The display changes to show the dedicated “File name” screen, on which you
can edit the current file name.
The leftmost character flashes.
2. Enter the desired name.
Use the [ SKIP/CURSOR ] keys to move the cursor position and use the
[SEL] dial (or the numeric keys) to enter a desired character.
By pressing the [CLEAR] key repeatedly when the cursor is pointing the leftmost
character, you can clear the whole name.
3. After entering the name, press the [ENTER] key to confirm the setting.
The Utility mode exits and the display shows the Normal screen.
<Note>
If you are going to set a file name which already exists, “Illegal Name!” is
shown and the display returns to show the previous screen.
flashing