Filter
Top Products
110
PD-6
DVD Location Recorder (Chapter 8: Utility mode)
Display
fUBITS=$
Details of setting/executionLine No.
01
02
03
04
05
06
07
08
fSCENE=**********
fTAKE=***
fTAPE=***********
fEVENT=*****
fTRK1=***********
fTRK2=***********
fNOTE=
The table below shows the details for the description information which Fostex
registers by default according to the screen example above.
These information can be used for creating an ALE file of AVID, as well as can
be directly exported to the AVID system via IEEE 1394 (or via a disk).
<Note>
Each character string before “=” shows the “header ID” of currently available
meta data.
The user bit used when recording time code is recorded as
the default setting.
When creating a file, the character string before “-” in the file
name is set as SCENE by default.
When creating a file, the three-digit number between “-” and
the file extension in the file name is set as TAKE by default.
When creating a file, the reel number (volume label) on the
disk is set as TAPE (up to 8 digits) by default.
The five-digit number set by the “Set Next Event” menu in
the Setup mode is set by default.
Track name of each track.
A default track name (up to 16 characters) is recorded for
each. The screen above shows the example when the
recording mode is set to stereo (2-track). The number of lines
increases if more recording tracks are used.
This is used for comment. By default, no data exists.
Each of these description information items can be edited.
“<New line>” (see the screen example above) is reserved for adding a new
information. See “Editing a description information” on the next page for
details.