Filter
Top Products
84
PD-6
DVD Location Recorder (Chapter 6: TC Setup mode)
EEEEERRR
MMDDYYff
DDMMYYff
SSSSSSRR
RRREEEEE
SSSSSSTT
<BWF UBIT>
flashing
User bit setting of playback time code
You can select the desired user bit of time code which is output from the
[TIME CODE OUT] connector while the [TC OUT] is set to “REPRO”.
1. Select the “TC Ubit: ********” menu and press the [ENTER] key.
The currently selected user bit flashes (the default setting is “EEEEERRR”).
2. Use the [SEL] dial to select the desired user bit and press the [ENTER] key to
confirm the selection.
BG_76543:EEEEE / BG_210:RRR
BG_76:MM (month)/ BG_54:DD (day)/ BG_32:YY (year)/ BG_10:ff (US)
BG_76:DD (day)/ BG_54:MM (month)/ BG_32:YY (year)/ BG_10:ff (EUR)
BG_756432:SSSSSS / BG_10:RR
BG_756:RRR / BG_54321:EEEEE
BG_765432:SSSSSS / BG_01:TT
Outputs the user bit of BWF descriptor information
EEEEE:EVENT No
Only the lower five figures of the numeral information in the event information recorded on BWF
are output from the rightmost five digits of the user bit fields.
RRR:REEL No
Only the lower three figures of the reel number recorded on BWF are output from the rightmost
three digits of the user bit fields.
RR:REEL No
Only the lower two figures of the the reel number recorded on BWF are output from the rightmost
two digits of the user bit fields.
SSSSSS:SCENE No
Only the lower six figures of the scene number recorded on BWF are output from the rightmost
six digits of the user bit fields.
TT:Take No
Only the lower two figures of the take number recorded on BWF are output from the rightmost
two digits of the user bit fields.
ff:File No (in decimal, 01 to 99)
<Notes>
• Date information shows the original date of an audio file.
• To output the event number, reel number, scene number, and
take number, it must be set in the Setup mode in advance.
3. Press the [EXIT] key to exit the TC Setup mode.