Filter
Top Products
44
PD-6
DVD Location Recorder (Chapter 3: Names and functions)
LTC
LTC IN
ABS
GEN
LTC
LTC IN
ABS
GEN
<Normal screen>
<Level screen>
• When you set an unused disk
If you set an unused disk after turning on the PD-6, the display prompts you to
format the disk, as below. See page 24 for details about disk formatting.
• When you set a disk with recorded data
If you set a disk with recorded data after turning on the PD-6, the file name and No.
are shown in the appropriate fields.
Other screens
• Time display mode selection
Each press of the [TIME/DISP MODE] key (when unSHIFTed) switches the time display
mode in the following order.
Shows LTC recorded on the disk. You can set the start time of LTC recording using the
appropriate menu in the TC Setup mode.
Shows incoming external LTC. If no LTC is received, “————” is shown.
Shows the absolute time, which is set to “00H00M00S00SF” at the beginning of the file.
Shows time code generated by the internal TC generator.
The value depends on [TC GEN] switch setting.
• Display mode selection
While SHIFTed, each press of the [TIME/DISP MODE] key switches the display between
the “Normal screen” and “Level screen”.