Filter
Top Products
46
PD-6
DVD Location Recorder (Chapter 3: Names and functions)
• EDL SEL mode screen
Pressing the [FILE SEL/EDL SEL] key while SHIFTed brings up the primary page of the
EDL SEL mode screen. By default, the screen something like the following is shown,
on which <New file> is highlighted for creating a new ALE file.
You can create or edit an EDL (Edit Decision List) file (ALE file) which is used for
exporting an audio file to the AVID system.
See “Chapter 9: EDL SEL mode <creating and editing an ALE file>” on page 123 for
details about the EDL SEL mode.
• CUE LIST screen
Pressing the [CUE] key brings up the cue point list screen, allowing you to check, edit
or create cue points.
See “Chapter 5: Recording/playback” on page 73 for details about cue points.
• FILE SELECT screen
Pressing the [FILE SEL] key brings up the audio file list screen, on which all audio files
recorded on the current disk is shown. You can load a desired audio file by selecting
the file using the [SEL] dial followed by pressing the [ENTER] key.
• Contrast adjust screen
Pressing the [CONTRAST/TC SETUP] key while unSHIFTed brings up the screen for
adjusting the display contrast.
While the display shows something like the following, rotate the [SEL] dial to adjust
the contrast. Rotating the dial counterclockwise weakens the contrast, while rotating
clockwise strengthens. After getting the desired contrast, press the [ENTER] key to
confirm the setting. The contrast adjust screen is dismissed.