Filter
Top Products
128
PD-6
DVD Location Recorder (Chapter 9: EDL SEL mode <Creating and editing an ALE file>)
3. While “<New entry>” is highlighted, press the [ENTER] key.
After showing “Please wait!”, the display changes to shows the “Sel. new entries”
screen for selecting audio files.
You can select “<Entry all>” if you want to add all audio files on the current
disk which can be added to the ALE file, or select an individual file.
<Note>
To distinguish audio file you want to add to an ALE file, we recommended
you to put “@” at the head of each audio file in advance using the [CIRCLE
TAKE] key.
4. Select “<Entry all>” or any desired audio file, and press the [ENTER] key.
If you select “<Entry all>” and press the [ENTER] key, all audio file entries are
shown on the screen (you can scroll through the list by rotating the [SEL] dial)
.
If you select an individual audio file and press the [ENTER] key, “Sel. next
entry!” is shown and you can make another entry successively.
Note that the audio files added to the ALE file are omitted from the “Sel. new
entries” list. After adding all desired entries, pressing the [EXIT] key brings up
the screen as shown below, on which you can check the entries. In the screen
example below, audio file “001” has been added.
5. After adding audio file entries, press the [EXIT] key.
The display returns to the “Edit ALE” screen.
6. Press the [EXIT] key again (or use the [SEL] dial to select “Save ALE file” and
press the [ENTER] key).
The display shows the screen for saving the ALE file, on which “Are you sure?”
flashes.
7. Press the [ENTER] key.
The display shows the screen for selecting an ALE file.
8. Press the [EXIT] key to exit the “EDL SEL” mode.