Filter
Top Products
111
PD-6
DVD Location Recorder (Chapter 8: Utility mode)
Editing a description information
1. Select a description information item and press the [ENTER] key.
The leftmost character of the selected item flashes. You can now make editing.
2. Use the [SKIP/CURSOR ] key to move the cursor to any desired character
on the right of “=”.
3. Use the [SEL] dial (or numeric keys) to enter the desired character.
Use the [ SKIP/CURSOR ] key to move the cursor.
When using the numeric keys for entering characters, pressing any other
numeric key moves the cursor to the right automatically.
To clear the currently recorded information, press the [CLEAR] key.
Pressing the [CLEAR] key clears the right next character to the cursor position.
4. After editing the information, press the [ENTER] key to confirm the setting.
5. To edit other items, carry out the same procedure as above repeatedly.
Adding a description information
1. Select the “<New line>” item at the bottom and press the [ENTER] key.
You are ready to enter information.
Carry out the same procedure as above for entering new information.
<Note>
When adding information to “New line”, enter the “meta data header ID”
followed by data.
Deleting a description information
1. Select a line you want to delete, and press the [ENTER] key.
You can now edit the information, as described above.
2. Use the [CLEAR] key to clear the whole information, and press the [ENTER]
key.
The line is deleted, while the following lines move up.
flashing