Filter
Top Products
94
PD-6
DVD Location Recorder (Chapter 7: Setup mode)
0 to 30 seconds
Option
Comment
Off (default)
TONE
Option
Comment
4POP TONE
<Slate tone recording mode>
<Slate tone recording time> (Tone rec time)
flashing
Slate tone recording time and mode setting (Tone rec mode)
The “Tone rec mode” menu sets the recording time and mode of the slate
tone which is recorded at the beginning of a file when recording is taken
place in the New file mode.
On the “Tone rec mode” menu screen, you can set the recording time (Tone
rec time) between 0 and 30 seconds, as well as the recording mode (Tone
rec) from among “TONE”, “4POT TONE” and “Off”.
You can set the slate tone recording time in 1 second steps (the default
setting is 10 seconds).
Nothing is recorded.
The 1 kHz tone at the reference level is recorded for the duration of “Tone
rec time”. While the slate tone is being recorded, you cannot record any
external signal.
Repeats four times the combination of recording the 1 kHz tone at the
reference level for 0.5 second and muting for 0.5 second.
While the slate tone is being recorded, you cannot record any external signal.