Filter
Top Products
10
PD-6
DVD Location Recorder
Real Time Clock menu You can check or edit the internal real-time clock.
Digital Out menu You can select the digital output signal format between AES/EBU and
SPDIF.
Digital In menu You can select the input channel sources between digital and analog.
Skip mode menu You can select the function of the [SKIP/CURSOR] key.
Diagnoses menu You can select whether logging errors during recording to the diagnoses
file or not.
Reference level menu You can select the PD-6 reference input level.
Peak hold time menu You can set the peak hold time of the level meters.
Tone rec mode menu You can set the recording duration and mode of the slate tone.
Auto cue menu You can select whether automatically recording a cue point or not at
the record start position.
Pause time menu You can set the pause cancel time.
Error tone menu You can select on or off of the error tone.
Speaker mute menu You can select whether muting the monitor speaker or not except
during recording.
Limiter parameter menu You can set the limiter parameters.
Default File name menu You can select the name form of an audio file when it is created between
date information base and scene/take number information base.
Default track name menu You can specify the default track name of audio files.
Next event menu You can set the event number of audio files.
USB keyboard menu You can select the USB keyboard type to be connected between US
and JAPAN.
User setup save menu You can save the setup data to the user box.
User setup load menu You can load the setup data from the user box.
Pre rec time menu You can set the pre-record time of audio pooled in the buffer.
Version menu You can check the PD-6 software version.
BATT warning menu You can set the threshold of the battery power voltage for generating
the error tone.
Chapter 7: Setup mode
This chapter describes details about menus in the Setup mode. Using Setup
mode menus, you can set preferences, etc. of the PD-6. The following menus are
available in the Setup mode.
<Note>
The Setup mode menu may change when the PD-6 software is updated.
Chapter 8: Utility mode
This chapter describes the Utility mode, in which you can make settings related
with DVD-RAM disks to be used with the PD-6, as well as format a disk. The
following menus are available in the Utility mode.
<Note>
The Utility mode menu may change when the PD-6 software is updated.