Filter
Top Products
100
PD-6
DVD Location Recorder (Chapter 7: Setup mode)
Comment
00001 to 99999
Options
Comment
flashing
For example, if you set “SCENE NAME” to “Action” and “TAKE NUMBER” to “-
003”, the file name of an audio file created when recording in the “New File
mode” is made for the first time is “Action-003”.
After then, each time you make recording in the “New File mode”, the TAKE
NUMBER is automatically incremented, so the file name will be “Action-004”,
“Action-005”, ...
Default track name setting (Default track name)
The “Default track name” menu specifies the default track name for each track of an
audio file created when recording is made in the “New File mode”.
The name specified for each track in advance is automatically added to the track
number. The default track name is recorded to each file as “fTRK” information in the
BWF BEXT Chunk Description.
In the “Default track name” menu screen, select a desired track and then enter the
desired name. The default track names are initially set to “track 1”, “track 2”, “track
3”, “track 4”, “track 5” and “track 6”.
Up to 16 ASCII characters can be entered as a track name.
<Note>
To edit a track name of a file, use the “Edit descriptor” item in the “File info.”
menu of the Utility mode.
Next event number setting (Next event No.)
The “Next event No.” menu sets the event number in the description information of
an audio file.
The event number is recorded to each file as “fEVENT” information in the BWF BEXT
Chunk Description.
With the “Next event No.” menu, you can set the desired number between 00001 and
99999.
The default is “00001”.
<Notes>
• The edited value is reflected to newly recorded audio files. It does not affect
the current audio files.
• If the event number exceeds 99999, the number starts from 00001 again.