Filter
Top Products
43
PD-6
DVD Location Recorder (Chapter 3: Names and functions)
Level meter section
1
2
3
4
5
6
7
8
9
File name field
Time display field
Remain field
File information field
Clock field
Battery field
TC field
File No. field
1
2
3
4
5
6
78
9
LCD display
The PD-6 is equipped with a 128 x 64 dot LCD display, which shows recording levels,
recorder status, setting menus, etc.
Initial screen (Normal screen)
• When no disk is set
If you turn on the PD-6 when no disk is set, the display shows something like the
following. After “—No Disk—” is briefly shown and the door lock is released, “-Unlock
door-” is shown in the file name field.
This screen is called “Normal screen” and includes the following information.
Shows the recording/playback level meters. The number of meters depends
on the track mode selected by the [REC TR] switch. The screen above
shows the example when the 2-track mode is selected.
Shows the audio file name (up to 13 characters) or the frame rate of external
time code while LTC IN is shown in the time display field.
Show the time value of the current file position in “ABS” or “LTC”. It also
can show an external time code value or internal generator time code
value. You can select the time display mode using the [TIME/DISP MODE]
key.
Shows the remaining recordable time of the disk.
Shows audio file No.
Shows Fs, bit and recording track mode of the file. It follows the [REC TR]
and [FS/24] switch settings.
Shows the current reference clock (INT, EXT or DIGITAL).
Shows the internal battery voltage.
When the AC adapter (AD-15C) is used, it fully lights.
Shows the frame rate of recording time code and TC GEN mode.
It follows the [FRAME] and [TC GEN] switches.