Filter
Top Products
12 iRMC S2/S3
Purpose and target groups of the manual
As an autonomous system on the system board of a modern PRIMERGY
server, the iRMC S2/S3 has its own operating system, its own web server,
separate user management and independent alert management. The
iRMC S2/S3 remains powered up even when the server is in stand-by mode.
This manual describes how to configure the iRMC S2/S3 and the various user
interfaces available.
1.1 Purpose and target groups of the manual
This manual is aimed at system administrators, network administrators, and
service staff who have a sound knowledge of hardware and software. It provides
basic information on the technology behind IPMI and deals with the following
aspects in detail:
– Logging on to the iRMC S2/S3
– Configuring the iRMC S2/S3
– User management on the iRMC S2/S3
– Advanced Video Redirection via iRMC S2/S3
– Remote Storage via iRMC S2/S3
– iRMC S2/S3 web interface
– Telnet/SSH-based interface (Remote Manager) of the iRMC S2/S3
– Configuring the iRMC S2/S3 with the Server Configuration Manager
– Updating the firmware
– Remote installation of the operating system via iRMC S2/S3
– IPMI OEM Commands
Service
If you have any further questions on remote management for PRIMERGY
servers, contact the service and support partners responsible for you.
Other information
http://www.ts.fujitsu.com