Filter
Top Products
158 iRMC S2/S3
BIOS - Backing up/restore BIOS settings, flashing BIOS
Restoration Status
Displays the status of the current restoration process. Successful
completion is indicated by "Operation successful". The Restoration Status
is only displayed if a restoration is currently in process or has completed.
You can clear the status display by clicking the Clear Status button, which
is only available if a status is currently displayed.
Clear Status
Clears the status information indicated under Restoration Status. This
button is only displayed if a status is currently indicated under
Restoration Status.
Restoration File
Clicking the input field or clicking Browse... opens a browser dialog
allowing you to navigate to a file (.pre) containing a backup of single BIOS
parameters in the ServerView® WinSCU XML format.
Apply
Initiates the restoration of single BIOS parameter settings based on the
file specified in the Restoration File field.
Once the restoration process has started, the current process status is
indicated under Restoration Status.
I Notes on the restoration process:
– During the restoration process, all buttons and input fields are
disabled.
– If powered off, the managed server will automatically be
powered on.
– If the managed server is powered on, the server is to be
rebooted. Otherwise the restoration process will remain in
state "Boot Pending".
– The managed server is powered off after the restoration has
completed.