Filter
Top Products
iRMC S2/S3 47
Configuring the LAN interface of the iRMC S2/S3
Ê Configure the following settings:
Management LAN
Set the value to Enabled.
Management LAN Port
The Management setting is recommended.
I For details on configuring the remaining settings see section
"Network Settings - Configure the LAN parameters" on page 238
and/or refer to the manual "BIOS (Aptio) Setup Utility" manual
corresponding to your server.
Ê Save the settings.
Ê If you want to use console redirection on the iRMC S3, continue with section
"Configuring text console redirection for the iRMC S3" on page 53.
If you do not want to use text console redirection on the iRMC S3, exit the
UEFI setup and continue with the next section "Testing the LAN interface".
3.1.4 Testing the LAN interface
You can test the LAN interface as follows:
Ê Use a web browser to attempt to log into the iRMC S2/S3 web interface. If
no login prompt appears, it is probable that the LAN interface is not working.
Ê Test the connection to the iRMC S2/S3 with a ping command.