Filter
Top Products
334 iRMC S2/S3
Power Management
8.9 Power Management
The following menu appears if you choose Power Management... from the main
menu:
Figure 204: Remote Manager: Power Management menu
The submenu contains the following functions:
Immediate Power Off Powers the server down, regardless of the status of
the operating system.
Immediate Reset Completely restarts the server (cold start),
regardless of the status of the operating system.
Power Cycle Powers the server down completely and then
powers it up again after a configured period.
Power On Switches the server on.
Graceful Power Off
(Shutdown)
Graceful shutdown and power off.
This menu item is only available if ServerView
agents are installed and signed onto the
iRMC S2/S3 as “Connected”.
Graceful Reset (Reboot) Graceful shutdown and reboot.
This menu item is only available if ServerView
agents are installed and signed onto the
iRMC S2/S3 as “Connected”.
Raise NMI
(via iRMC S2/S3)
Initiates a non-maskable interrupt (NMI) via
iRMC S2/S3
Table 11: Power Management menu