Filter
Top Products
54 iRMC S2/S3
Configuring text console redirection via LAN
Ê Call the Console Redirection menu:
Figure 14: Console Redirection menu
Ê Make the following settings in the Console Redirection menu:
Console Redirection
Set the value to Serial 1. In this case, the terminal uses the first serial
interface.
Baud Rate
Specify the baud rate.
Protocol
Leave this setting unchanged. (The setting depends on the terminal
type used.)
Flow Control
The setting depends on the terminal type used. The settings must be
the same on both terminal and managed server.
Exiting the UEFI setup utility
Ê Save your settings and exit the UEFI setup utility.
Ê Continue with section "Testing the LAN interface" on page 47.