Filter
Top Products
182 iRMC S2/S3
iRMC S2/S3 - Information, firmware and certificates
Firmware Image Information
Under Firmware Image Information, you can view information on the firmware
version and the SDRR version of the iRMC S2/S3 and set the firmware selector.
Figure 96: iRMC S2/S3 Firmware Update - Firmware Information
Firmware Selector
You use the firmware selector to specify which firmware image is to be
activated the next time the iRMC S2/S3 is rebooted.
You have the following options:
– Auto - FW Image with highest FW version
The firmware image with the most recent version is selected
automatically.
– Low FW Image
The low firmware image is selected.
– High FW Image
The high firmware image is selected.
– Select FW Image with oldest FW version
The firmware image with the oldest version is selected.
– Select most recently programmed FW
The most recently updated firmware image is selected.
– Select least recently programmed FW
The least recently updated firmware image is selected.
Apply
Click Apply to set the firmware selector to the option you have set under
Firmware Selector.