Filter
Top Products
iRMC S2/S3 247
Network Settings - Configure the LAN parameters
Refresh every ... seconds
Length (in seconds) of the interval for automatically refreshing the
iRMC S2/S3 web interface.
I If you enter a value for the refresh interval which is less than the
Session Timeout (see page 246), your session will not automatically
be closed when the time specified in Session Timeout has elapsed
in the event of inactivity.
Ports for text-based access
Telnet Port
Telnet port of the iRMC S2/S3
Default port number: 3172
Configurable: yes
Enabled by default: no
Communication direction: inbound and outbound
Session Drop Time
Period of inactivity (in seconds) after which a Telnet connection is
automatically cleared.
SSH Port
SSH (Secure Shell) port of the iRMC S2/S3
Default port number: 22
Configurable: yes
Enabled by default: yes
Communication direction: inbound and outbound
Telnet enabled
If you enable the Telnet Enabled option, users can establish a connection
to the iRMC S2/S3 on the Telnet port specified in the entry field.