Filter
Top Products
46 iRMC S2/S3
Configuring the LAN interface of the iRMC S2/S3
Ê If you want to use console redirection on the iRMC S2 continue with section
"Configuring text console redirection for the iRMC S2" on page 49.
If you do not want to use text console redirection on the iRMC S2, exit the
BIOS/TrustedCore setup and continue with the next section "Testing the LAN
interface".
3.1.3.2 Configuring the LAN interface of the iRMC S3 by using the UEFI
setup Utility
Ê Call the UEFI setup utility of the managed server. Do this by pressing [F2]
while the server is booting.
Ê Call the iRMC LAN parameter configuration menu:
Server Mgmt – iRMC LAN Parameters Configuration
Figure 9: iRMC LAN Parameters Configuration Menu