Filter
Top Products
24
Connecting the power cord
1 Plug the mains cable supplied into the »110-240V~« socket
on the back of the HDD DVD recorder.
2 Plug the power cord into the wall socket.
Caution:
The only way to disconnect the HDD DVD recorder from the
mains is to pull out the plug.
Note:
Do not connect any other equipment while the device is
switched on. Switch off the other equipment as well before con-
necting it.
Only plug the device into the mains socket after you have con-
nected the external devices and the antenna.
Inserting batteries in the remote control
1 To open the battery compartment, press the catch and remove
the lid.
2 When inserting the batteries (Mignon type, e.g. R06 or AA,
2 x1.5 V), observe the polarity marked on the battery compart-
ment.
3 Close the battery compartment.
Note:
If the HDD DVD recorder no longer reacts properly to remote
control commands, the batteries may be flat. Always remove
used batteries. The manufacturer accepts no liability for dam-
age resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, should
not be disposed of with household waste. Please dispose of
used batteries in an environmentally responsible manner. Find
out about the legal regulations which apply in your area.
CONNECTION AND PREPARATION _____