Filter
Top Products
ENGLISH
61
Recording on disc and simultaneous playback
from the HDD archive
1 Switch on the television and select the preset channel for the
HDD DVD recorder.
2 Press »
Ǽ« to switch on the HDD DVD recorder from standby
mode.
– When you switch on the HDD DVD recorder, the current pro-
gramme that you can see on the television screen is recorded
in the time shift memory.
Note:
Please select the recording quality before starting the recording.
See the section on custom settings and selecting the recording
quality on page 96.
3 Switch to disc mode with » « (blue).
– A message appears. Press »OK« to acknowledge.
4 Open the disc compartment, insert the disc with the label facing
upwards and close it.
– Display: The recording time and the amount of recording time
still available.
5 Press »SOURCE« to select the input source (for example, TV).
6 Press »
A
« or »
S
« or use the numerical buttons »1…0« to
select the TV channel or open the programme list with »OK«,
press »
A
« or »
S
« to select the TV channel and switch off the
programme list with »x«.
7 If you would like to change the recording quality, press
»Q-SET« until the recording quality you want appears in the
display.
8 Press »
●« to start recording on the disc.
– The amount of recording time available is shown.
9 Open the HDD archive by pressing » « (yellow).
10 Select the title by pressing »
S
« or »
A
«.
– The thumbnail index of the selected recording is displayed in
the contents table.
11 Press »
8« to start HDD archive playback.
12 Press »
7« to end HDD archive playback.
13 Press » « (blue) to switch back to disc mode.
14 Press »
7« to end recording on the disc.
– A message appears. Press »OK« to acknowledge.
– You can see the recording data in the table of contents on the
disc.
Note:
If this message is not acknowledged, the HDD DVD recorder
continues recording on the disc.
SIMULTANEOUS OPERATING MODES ___
Select
and
Choose
14:25:00
14:25:05
‹‹‹‹
L I V E
TimeShifting Record
HDDDVD
DVD Target
Exit
Select
and
Choose
Sys state: STOP
Record To Optical Disc as (25min/GB)
Elapsed Time: 00:00:00 Remain Space: 02:05:00
DVD Target Record
HDDDVD
HDD Target
Exit
Select
and
Choose
Sys state: RECORDING
Record To Optical Disc as (25min/GB)
Elapsed Time: 00:00:05 Remain Space: 02:04:55
HDD Exit
Select
and
Choose
Sys state: STOPPING
Record To Optical Disc as (25min/GB)
Elapsed Time: 00:00:05 Remain Space: 02:05:00
HDD Exit
Select
and
Choose
Sys state: STOP
Record To Optical Disc as (25min/GB)
Elapsed Time: 00:00:00 Remain Space: 02:05:00
DVD Target Record
HDDDVD
HDD Target
Exit