Filter
Top Products
ENGLISH
99
Setting the time and date
If you do not want to use the date and time broadcast by a tele-
vision station, you can set it manually.
1 Press »SET UP« to open the setup menu.
2 Select »SETUP-MENU – DATE/TIME« ( ) with »
S
« or
»
A
« and press »OK« to confirm.
3 Select »Date« with »
S
« or »
A
« and press »OK« to
confirm.
Enter the date in six digits with »1…0« and press »OK« to
confirm.
4 Select »Time« with »
S
« or »
A
« and press »OK« to
confirm.
Enter the time in four digits with »1…0« and press »OK« to
confirm.
5 Press »SET UP« to complete the setting.
Switching the HDD DVD recorder to another
Grundig remote control
You can adjust the HDD DVD recorder so that it can be operated
with a remote control from another Grundig device.
1 Press »SET UP« to open the setup menu.
2 Select »SETUP-MENU – PREFERENCES« ( ) with »
S
« or
»
A
« and press »OK« to confirm.
3 Select »Remote Control Type« with »
S
« or »
A
« and press
»OK« to activate.
4 Select the remote control type with »
S
« or »
A
« and press
»OK« to confirm.
– The HDD DVD recorder can now be operated with another
remote control. The HDD DVD recorder no longer responds to
its own remote control.
5 Press »SET UP« to complete the setting.
Note:
If you want to operate the HDD DVD recorder with its own
remote control again, you have to open the main menu with
»
6 « (press and hold down) on the device.
Activate the setup menu using the menu buttons (»5«, »6 «,
»PROG +«, »PROG –« and »
7
«) on the device and set the
remote control type to »HDD DVD recorder«.
SPECIAL SETTINGS ______________________
SETUP MENU – DATE / TIME
a
Auto
P001/BBC
Date - Time Setting
Program
Date (dd / mm / yyyy)
Time (hh : mm)
01
02 2006
10
15
SETUP MENU – PREFERENCES
a
Off
OK
On
RGB
Tuner
OK
DVD Recorder
Rating Level
Change Password
Restore factory settings
Screensaver
SCART output
Default Source
Remote Control Type