Filter
Top Products
ENGLISH
25
INITIAL SETUP___________________________
Switching on the HDD DVD recorder
1 Switch the HDD DVD recorder to standby mode by pressing
»Ǽ« on the device and press »Ǽ« on the remote control to
switch on from standby.
– Display: »HELLO« flashes.
Initial setup
When you first switch on the HDD DVD recorder, the »Initial setup«
menu always appears.
This guides you step by step through each setting.
Selecting the screen menu language
This is how to set the language of the HDD DVD recorder’s
screen menus.
1 Select your language using »
A
« or »
S
« and press »OK« to
confirm.
2 Select »NEXT« by pressing »OK«.
Selecting the country (location)
This setting determines the sort order of the TV stations.
1 Press »
S
« or »
A
« to select the country and press »OK« to
confirm.
2 Select »NEXT« by pressing »OK«.
Tuning television stations
The HDD DVD recorder has its own receiver unit. It can receive and
record from television stations independently of the television. This
means the TV channels have to be tuned on the HDD DVD recorder.
During this setting, the clock is automatically updated. However, this
is only possible if you find a television station with teletext and valid
time information.
1 Select »SCAN« with »
S
« or »
A
« and press »OK« to start
the search.
– The HDD DVD recorder searches all channels for television
stations, then sorts and saves them. The automatic search may
take several minutes.
2 Select »NEXT« by pressing »OK«.
Setting the time and date
1 If the time and date are correct, select »NEXT« »OK« to con-
firm.
Initial setup
PREV
Select country.
Germany
Sweden
Switzerland
Turkey
U.K.
NEXT
S
S
A
Initial setup
PREV
This step will scan for TV signals.
Please check that antenna or
cable has been connected
correctly.
NEXT
SCAN
Initial setup
CANCEL
Select OSD language.
English
English
Français
Español
Deutsch
NEXT
S
S
A