JVC VR-509E DVR User Manual


 
17
Installation and Preparation
1. Press the [MENU] button.
The MENU screen will be displayed.
* Press the [MENU] once again to close the MENU screen.
* Recording in the motion detection mode is not possible when
operations are being carried out on the menu.
2. Select your desired item with [S/T], and then press
the [SET] button.
The setup screen will be displayed.
* Press the [RETURN] to return to the previous screen.
* The above example is the “DETAIL REC” screen.
3. Select your desired item with [S/T]
It is possible to change the value settings that are
displayed on the right-hand side of the menu selections.
Proceed to 4.
Menu selections that do not show values on the right-
hand side advance onto different MENU screens when
selected. Repeat procedure 2. until your desired screen
is displayed.
4. Change the value settings with [–/+].
Press [–/+] to change the values displayed on the
screen.
* The above example is the “DETAIL REC” screen.
5. Press the [SET] button.
The confirmation screen will be displayed.
* The above example is the “DETAIL REC” screen.
6. Select “SAVE” with [W/X], and then press the [SET]
button.
The settings will be saved accordingly.
* Select “CANCEL” with [W/X] and then press the [SET]
button to close the confirmation screen. The settings will
not be saved in this event.
Press the [FUNCTION] button to display the user guidance
in the menu screen display mode.
Press the [RETURN] button or the [MENU] button for at
least two consecutive seconds to close the menu screen.
MENU Screen Operations
Displaying the MENU Screen
Proceeding to Other MENU Screens
INTRODUCTION SET
DETAIL REC
DETAIL OPERATION
LIVE PICTURE
Button operation explanation
FUNCTION : USER GUIDANCE
SET UP
CURSOR
UPDATE/NEXT
BACK
2.
DETAIL REC
DATE TIMER ..
OFF
ALARM REC ..
PROGRAM TIMER
WEEKLY TIMER ..
WATER MARK
TIMER/MODE(REC PATERN)
ONNOMALLY AUDIO REC
ALARM AUDIO REC ON
ALARM TERMINAL ..
OPERATION SET ..
1 MINEMERGENCY REC
10 SEC
PASSCODE ERROR REC
3.
Changing Value Setting
Displaying the Confirmation Window
Saving the Setting
Displaying User Guidance on the Menu Screen
Closing the Menu
4.
DETAIL REC
OPERATION SET ..
NORMAL AUDIO REC
ALARM AUDIO REC
ALARM TERMINAL ..
ALARM REC ..
EMERGENCY REC
PASSCODE ERROR REC
TIMER/MODE(REC PATTERN)
WEEKLY TIMER ..
DATE TIMER ..
WATER MARK
ON
ON
5 MIN
30 SEC
PROGRAM TIMER
OFF
DETAIL REC
DATE TIMER
OFF
ALARM REC
..
PROGRAM TIMER
WEEKLY TIMER
WATER MARK
TIMER/MODE(REC PATERN)
ONNOMALLY AUDIO REC
ALARM AUDIO REC ON
ALARM TERMINAL
..
OPERATION SET
..
1 MINEMERGENCY REC
10 SECPASSCODE ERROR REC
A SET CONTENT WAS CHANGED.
DO YOU UPDATE THIS CONTENT?
SAVE CANCEL