JVC VR-509E DVR User Manual


 
Useful Features Using a PC
50
When a power failure occurs while in the Recording mode or
Alarm Record Standby mode, or when a failure occurs in the
recorded data on the hard disk, recording/playback may not
function properly. To repair the hard disk, two types of scan disk
functions are available on the VR-509:
Scans the hard disk automatically when the power is switched
on.
1. Press the [MENU] button.
Opens the menus in accordance with the instructions
provided in Changing MENU Settings (page 17) in the
sequence of “MENU” “DETAIL OPERATION”
“MAINTENANCE”.
2. Select [AUTO SCAN DISK] with [S/T].
3. Select [ON] with [–/+].
4. Press the [SET] button.
A confirmation screen will be displayed.
5. Select [SAVE] with [W/X], and then press the [SET]
button.
Performs manual scanning of the hard disk. Perform Manual
Scan Disk regularly when the “AUTO SCAN DISK” item in the
menu is set to “OFF” or when the power to the equipment
remains on for extensive periods of time. (About once a month)
1. Press the [MENU] button.
Opens the menus in accordance with the instructions
provided in Changing MENU Settings (page 17) in the
sequence of “MENU” “DETAIL OPERATION”
“MAINTENANCE”.
2. Select [MANUAL SCAN DISC] with [S/T], and then
press the [SET] button.
The SCAN DISC function will be executed.
Hard Disk Maintenance
AUTO SCAN DISK
MAINTENANCE
AUTO SCAN DISK
MANUAL SCAN DISK
ALARM LIST CLEAR
DEFRAG DATABASE
FORMAT
MIRRORING
PASSCODE SET
MAINTENANCE/LOG
AREA SELECT
OFF
EXEC
EXEC
3.
2.
MANUAL SCAN DISK
Press the [CANCEL] button to abort the scandisk
process.
This has no effect if the scandisk process is in progress.
There are cases where the time required for ending the
process is extended if the size of the recorded event is
large or there are a large number of events (several
hours.)
Recording, playback and search functions cannot be
used when the scandisk procedure is running.
MAINTENANCE
AUTO SCAN DISK
MANUAL SCAN DISK
ALARM LIST CLEAR
DEFRAG DATABASE
FORMAT
MIRRORING
PASSCODE SET
MAINTENANCE/LOG
AREA SELECT
OFF
EXEC
EXEC
2.
The manual scandisk process cannot be executed when in
the following operation modes:
During recording.
During the playback of recorded images.
When the timer is ON.
During DVD export.
When a malfunction occurs with the hard disk.
CAUTION