Filter
Top Products
Explanations
98
Problems with the DVD
If the following messages are displayed during DVD exporting or DVD playback, press the [CANCEL] button to delete the message,
and then check the cause of the problem.
Problems with Flash Memories
Troubleshooting (continued)
Onscreen Display
Cause and Recovery
Refer
to
Page
“DVD export data retrieval was
discontinued (D-01)”
“DVD export data retrieval was
discontinued (D-02)”
“DVD export data retrieval was
discontinued (D-03)”
• No relevant retrieval data.
• The result of the search exceeds the disk capacity.
• Search processing error.
P57
“DVD export data conversion
was discontinued (D-01)”
“DVD export data conversion
was discontinued (D-02)”
“DVD export data conversion
was discontinued (D-03)”
• No relevant conversion data.
• The result of the conversion exceeds the disk capacity.
• Conversion processing error.
P57
“DVD export data disk making
was discontinued (D-01)”
“DVD export data disk making
was discontinued (D-02)”
“DVD export data disk making
was discontinued (D-03)”
• Disk creation failed.
→ There is a chance that an error occurred on the relevant disk.
• The inserted disk is not supported.
• Disk deletion failed.
→ There is a chance that an error occurred on the relevant disk.
P57
“There is no file can be
reproduced in DVD (D-01)”
“There is no file can be
reproduced in DVD (D-02)”
“There is no file can be
reproduced in DVD (D-03)”
• The directory for list creation does not exist.
• The file for list creation does not exist.
• List creation failed.
P60
Onscreen Display
Cause and Recovery
Refer
to
Page
“STILL PICTURE FAILED”
“DOWN DATA FAILED”
• The flash memory was disconnected during writing operations.
• The flash memory is set for read-only operations.
→ Disable the read-only function.
• The flash memory does not have sufficient capacity.
→ Increase the available capacity, or connect a new flash memory.
• Sufficient capacity is available, but writing is not possible. (There are
limits to the number of files a USB flash memory can store in the root
directory.)
→ Either store the new file in a sub-directory, or delete some of the other
files.
P62
P63
“UP DATA FAILED” • The flash memory was disconnected during reading operations.
• No menu setting data exists on the flash memory.
• The VR-509 version does not match up with the menu setting data
version.
• The menu setting data file is damaged.
P63