Filter
Top Products
49
ENGLISH
•
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Operations
Various playback
■ Playing still frames
1. Press the PAUSE button during playback.
• The unit will shift into still frame mode. By pressing the PAUSE
button once again, the unit will return to its previous mode.
• By pressing the Camera number button while the still frame
is displayed, the unit will conduct a forward search of that
channel’s images and immediately display them on-screen.
■ Shuttle viewing
The SHUTTLE ring can be used to adjust playback speed
to varying rates. Playback speed will vary according to how
far the SHUTTLE ring is turned.
The unit will shift to still frame playback mode when
the SHUTTLE ring is returned to its former position.
1. Press the PAUSE button during playback, and then turn
the SHUTTLE ring.
1
1
2
3
4
5
6
7
2
3
4
5
6
7
Reverse speed search (1MB units)
Reverse speed search (5X speed)
Reverse speed search (3X speed)
Still frame playback
Forward speed search (3X speed)
Forward speed search (5X speed)
Forward speed search (1MB units)
■ Shuttle hold
By pressing the PAUSE button during playback (or reverse
playback), the unit will shift into still frame mode. Rotate the
SHUTTLE ring in the desired direction and to the desired search
speed, then press the PAUSE button while holding the SHUT-
TLE ring to position. Search speed will be maintained even
when the SHUTTLE ring is returned to its original position.
■ Direct shuttle viewing
Direct shuttle playback can be activated by turning the
SHUTTLE ring during playback or reverse playback.
The unit will shift to regular playback mode when
the SHUTTLE ring is returned to its former position.
1. Turn the SHUTTLE ring during playback.
Please refer to the above diagram for the playback speed.
INFORMATION
When playback images recorded
at different recording intervals, there may be rare
occasions when playback speed differs from the
original recording rate.
■ Frame-by-frame playback
1. Turn the JOG dial in either direction during still frame playback.
• Turn the JOG dial to the right to move forward one frame
and to the left to move back one frame. Continue turning the
JOG dial to the right for forward playback of consecutive
frames and to the left for reverse playback of consecutive
frames. Stop turning the dial for still frame viewing.
• During frame-by-frame playback in single-screen display
mode, playback will lag behind rapid JOG dial rotation be-
cause the unit is simultaneously engaged in searching for
images in the displayed channel.
■ Reverse playback
1. Press the REV PLAY button when the unit is not in operation.
• The unit will begin reverse playback.
On the first reverse playback after the power
switch is turned on or after recording, the unit will
start by displaying the last recorded image.
■ Changing playback intervals
When the PLAY or REV PLAY button is pressed while the
unit is not in operation, playback will occur at the same inter-
vals as the recording intervals. Playback intervals can be
changed, however, when the PLAY or REV PLAY button is
pressed while the unit is in playback or reverse playback
operation. (The unit will emit a sound to indicate that play-
back interval has been changed.)
Playback intervals can be confirmed on-screen
by using the single-screen display mode and enter-
ing “2” or “3” in the DISPLAY MODE setting of the
<TIME DATE DISPLAY> menu.
The audio recording cannot be played when play-
back interval has been altered, even if the playback
interval is returned to its original rate. To play back the
audio recording, stop playback once and restart it at
the original rate.
• Playback or reverse playback intervals are speed up when the
PLAY button is pressed, and playback or reverse playback in-
tervals are slowed down when the REV PLAY button is pressed.
INFORMATION
This is a convenient function for slow
viewing of recordings with fast movement as well as fast
playback of images captured at long recording intervals.
■ High-speed fast-forward/high-speed rewind
When the SHUTTLE ring is turned clockwise or counter
clockwise for over one second during STOP mode, the unit
will shift into high-speed fast-forward or high-speed rewind
mode, and an indicator will appear at the bottom left of the
monitor. “S” denotes the start point of the data stored in the
hard disk, and “E” denotes the end point. The vertical line
marks the current position.
01-01-1999 FRI A0001
00:00:00 25F 30%
SE
■
Monitor display settings and playback operation
• Single screen: The screen will change frame by frame at
a rate equal to the recording interval multiplied by the
number of cameras used in the recording.
• SPLIT 4: Each mini-screen will change frame by frame at a rate
equal to the recording interval multiplied by the number of cam-
eras used in the recording. The screen display shift to still frame
mode during playback from a camera which is not indicated.
• SPLIT 9: Each mini-screen will change frame by frame at
the recorded rate.