Filter
Top Products
57
ENGLISH
•
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Operations
RS-232C settings / Connecting to a personal computer
■ RS-232C settings
This setting can be used for remote device control and re-
cording supplementary information when the main unit is
connected to a PC.
♦ Transmission speed
Example: Transmission speed is set for 48000 bps.
1. Press the SET UP button to display the <MENU SETTING>
menu.
2. Turn the JOG dial to move the cursor to REAR TERMINAL
then turn the SHUTTLE ring to the right.
<REAR TERMINAL>
@MODE OUT
CAPACITY REMAIN
CALL OUT
BUZZER
RS-232C SETTING
REC
HDD-10%
KEY
3. Turn the JOG dial to move the cursor to RS-232C SETTING
and turn the SHUTTLE ring to the right.
• The <RS-232C SETTING> menu will appear.
CALL OUT
BUZZER KEY
@RS-232C SETTING
4. Check that the cursor is next to TRANSMISSION RATE
and turn the SHUTTLE ring to the right to flash the sub-item.
<RS-232C SETTING>
@TRANSMISSION RATE
DATA BIT LENGTH
PARITY BIT
STOP BIT LENGTH
DELIMITER
1200
8BIT
NONE
1BIT
CR
5. Turn the JOG dial to select “4800” and turn the SHUTTLE
ring to the right to finish setting.
<RS-232C SETTING>
@TRANSMISSION RATE
DATA BIT LENGTH
PARITY BIT
STOP BIT LENGTH
DELIMITER
4800
8BIT
NONE
1BIT
CR
6. Press the SET UP button.
• The <RS-232C SETTING> menu will disappear.
■ Connecting with a personal computer
This setting can be used for remote device control and re-
cording supplementary information when the main unit is
connected to a PC.
Please use RS-232C Straight cable (9pin) to con-
nect a modem with this unit. The setting of CTS
should be set to “HIGH” or “ON”. Please refer to the
instruction manual of a modem for details about con-
nection.
♦ Connection via modem
123456789
1
RS-232C
234
1
GND GND
2345678
ALARM IN
56789
Modem Modem
Personal Comput
RS-232C straight cable (9 pin)
phone line
♦ Direct connection
123456789
1
RS-232C
234
1
GND GND
2345678
ALARM IN
56789
Personal Computer
RS-232C crossover cable
Please use RS-232C crossover cable (9pin) to
connect a modem with a personal computer. RS -
232C Crossover cable differs depending on the per-
sonal computer.