Mitsubishi Electronics WD-57831 CRT Television User Manual


  Open as PDF
of 126
 
Chapter 3. TV Setup 37
Note:
• IfusingaCableCARD™,thecompletelistof
availablechannelsisprovidedthroughthe
CableCARDandtheANT 1optionisgrayedout.
• IntheTVGuideOnScreen®system,thechan-
nelsdisplayedandtheorderinwhichtheyare
displayedareindependentoftheTV’schannel
memorization.RefertotheTV Guide On Screen
Interactive Program Guide User’s Manualfor
detailedinstructionsoneditingchannelsshown
inthisguide.
Clock (Setup Menu)
SettheclockifyouwishtousetheTV’sTimerfunctionor
scheduleNetCommand-controlledrecordings.Youcan
useeitherthemanualorautomethodtosettheclock.
Figure 4. Clock submenu
Setting the Clock Manually
Time
Withthehourhighlightedinyellowcharacters,press
repeatedlytoslowlyincrementthehourandassociated
AM/PM indicatororpressandholdtoquicklyincrement
thehour.Press
ENTER
tohighlighttheminutesinyellow.
Press tosettheminutes.Press tomovetothe
Datebox.
Date
Withthemonthhighlightedinyellowcharacters,press
toselectthecorrectmonth.PressENTERtohighlightthe
day.Press toselectthecorrectday.PressENTER
tohighlighttheyear.Press toselectthecurrentyear.
Press tomovetotheTime Zonebox.
Time Zone
Selectyourcorrecttimezone.Press or toselect
thetimezoneforyourarea(Atlantic, Eastern, Central,
Mountain, Pacific, AlaskaorHawaii).Press tomove
totheDaylight Savingsbox.
Daylight Savings
Press or toselecteitherAppliesorIgnore,depending
onwhetherornotdaylightsavingstimeisusedinyourarea.
Timer (Setup Menu)
Figure 5. Timer submenu
TheTimerfeatureallowsyoutosetadayandtimeforthe
TVtoturnonautomaticallyandthedeviceandchannelto
displaywhenitswitcheson.IftheTVisalreadyonatthe
requestedtime,theTVautomaticallytunestothechannel
youdesignatedintheTimermenu.
WhentheTimerturnsontheTV,thescreendisplaysthe
message“PressabuttonfortheTVtostayon.”Press
anybuttonontheremotecontrolwithinfiveminutesifyou
wishtheTVtoremainon.
Note: TheTVclockmustbesetbeforeyoucanusethe
Timerfeature.
On/Off
Press toenableordisabletheTimer.Press to
movetotheDaybox.
Note:
IfClock SettingissettoManual,eachtimethetime
changeoccurs,youmustopenthismenuandsetthe
TV’sclockaheadorback.
IfyouhaveselectedAutoforClock Setting,theTV’s
clockadjustsautomaticallytodaylightsavingstime.
Setting the Clock Automatically
SelecttheTime ZoneandtheDaylight Savings(DST)
optionsforyourstate.Press toselectAppliesor
Ignore.Youmaythentunetoachannelon
ANT 1
or
ANT 2
thatusesExtendedDataService(XDS)timedata,
typicallyaPBSchannel.WithAutoselected,theTVauto-
maticallyretrievesthecorrecttimeanddateinformation
fromthischannel.
Beawarethatifachanneldisplaysincorrecttimeinforma-
tion,itisbecauseofinformationsentfromthebroadcaster
andisnotadefectoftheTV.
Note: Youmayfindthatsomechannelssendtheincor-
recttimeandtheTVclockisreseteverytimeyou
tunetothosechannels.Topreventunwanted
clockresets,firstusetheAutomethodtosetthe
clockfromachannelsendingthecorrecttime,
thenchangethemethodtoManual.
Setup Menu, continued
 previous next