Mitsubishi Electronics WD-57831 CRT Television User Manual


 
Chapter 7. Using the TV with a Personal Computer 91






Figure 5. Computer resolution, XGA selection
Adjusting Image Resolution
YourMitsubishiTVcandisplayresolutionsfromstandard
VGA(640x480)through1920x1080signalsatarefresh
rateof60Hz.Theresolutionof1920x1080issupported
atrefreshratesof24,30,and60Hz.SeeAppendixBin
thisbookformoreoncompatiblescreenresolutions.
Whenconnectingacomputerprovidingdigitalvideo,in
mostcasesthecomputerwillselectthebestresolution
matchtodisplayontheTV.Youcanoverridethissetting
ifyouwish.Foracomputerprovidinganalogvideo,you
mayneedtosettheresolutionmanually.Theinstruc-
tionsbelowareforsettingtheresolutiononmostpersonal
computers.
1. InthePC’sStartmenu,selectSettings.
2. SelectControl Panel.
3. SelectDisplay.
4. ChoosetheSettingstab.
5. Changetheresolutiontothehighestresolutionwith
theaspectratiobestsuitedfortheimage.Seethe
NOTE: WhenevertheTVispoweredon,thelampisin
use,eveniftheTVscreenappearsdark.Asa
reminderthattheTVispoweredonandthattime
isbeingaddedtothelamp’selapsedhours,set
thecomputer’sscreensavertoapatternthatwill
displayafterseveralminutesofinactivity.
tableonthenextpageshowingpossiblePCformats.
Dependingonyourcomputer’soperatingsystem,
adjusttheresolutionwitheither:
• theScreenareaslider.
• theScreenResolutionslider
6. Tochangetherefreshrate,clickontheAdvanced
button.
7. OntheMonitor tab,selectasettingfromtheScreen
refresh ratedrop-downlist.Theresolutionof1920
x1080issupportedatrefreshratesof24,30,and60
Hz;otherresolutionsaresupportedat60Hzonly.
Youmayneedtorestartthecomputerforthischangeto
takeeffect.