Mitsubishi Electronics WD-57831 CRT Television User Manual


  Open as PDF
of 126
 
Chapter 3. TV Setup 45
Additional Setup Using the
NetCommand Menu, continued
IMPORTANT
All audio from what you are watching on
the TV is always available as an output on
both the TV’s AUDIO OUT LEFT/RIGHT and
DIGITAL AUDIO OUT jacks.
To use the surround sound capabilities of your
A/V receiver however, you must connect your
DVD player, satellite receiver, or cable box
directly to the A/V receiver, as surround sound
may not be available from the TV’s audio output.
Automatic A/V Receiver Switching, Part 1: Learn IR
Codes for A/V Receiver Inputs
1. ConnectyourA/VreceivertotheTVandDVDplayer.
Seechapter2,“TVConnections,”forsuggestions.
2. OpentheNetCommandmenu.
3. HighlighttheLearnbuttonunderAV RECEIVER
SETUPandpress
ENTER
todisplaytheAVReceiver
(AVR)Learnscreen.Seefigure15.
WhentheAVReceiverLearnscreenopens,the
highlightisonthecheckboxforInput 1.Theterms
Input 1–Input 4aregenericreferencestotheA/V
receiverinputsforwhichtheTVcanlearnIRcodes.
4. Inthisexample,theIRcodefortheA/Vreceiver’s
TV
Audio
inputwillbe“learned”asInput 1.
Press
ENTER
ontheTV’sremotecontrolandwhilethe
textInput 1isflashing,pressandholdthe
TV INPUT
key
ontheA/Vreceiver’sremotecontrol.
5. Whenacheckappearsinthecheckbox,releasethe
TV INPUT
key.
6. Press tohighlightthetextboxforInput 1.Toenter
aname:
• Use ontheTV’sremotecontroltoselecta
character.
• Press
ENTER
tosettheletterandmovethehighlight
tothenextletter.
57
*ODPNJOH
$PBYJBM
$BCMF
"73FDFJWFS
%7%BVEJP
JOQVU
57BVEJP
JOQVU
EJHJUBMPS
BOBMPHBVEJP
GSPN57
57BVEJPPVU
%7%1MBZFSXJUI
%JHJUBM4VSSPVOE4PVOE
WJEFP
7$3XJUI
"OBMPH"VEJP
WJEFP
BOBMPHBVEJP
*&&&
%FWJDF
BVEJPWJEFP
57BVEJPPVU
BVEJPWJEFP
.FNPSZ$BSET
EJHJUBMTVSSPVOETPVOE
Figure 14.
Overview of A/V receiver connections described
• Todeletealetter,highlightitandpressCANCEL
orpress toinsertablankspace(underscore
character).
• Toreturnthehighlighttothefirstcharacter,
repeatedlypress
CANCEL
.
• Toreturntothedefaultname,highlightthefirst
characterandpress
CANCEL
.
A/V
Receiver
Audio Inputs
Text boxes for you to
enter the name of the associated
audio input on the A/V receiver
A/V receiver com-
mands the TV can
send when “learned”
Figure 15. The AV Receiver (AVR) Learn screen lets you
set up NetCommand control of your A/V receiver.
7. Press tohighlightthecheckboxforInput 2.In
thisexample,theIRcodefortheA/Vreceiver’s
DVD
Audio
inputwillbe“learned”asInput 2.
8. Press
ENTER
ontheTV’sremotecontrolandwhilethe
textInput 2isflashing,pressandholdthe
DVD INPUT
key
ontheA/Vreceiver’sremotecontrol.
9. Whenacheckappearsinthecheckbox,releasethe
DVD INPUT
key.
10.Press tohighlightthetextboxforInput 2.Enter
thenameDVD.Use toenterthenameDVD.
Press
ENTER
toseteachletter.
Figure 16. Assign names to
identify “learned” A/V receiver
audio inputs
11. Repeatsteps7through10foranyadditionalA/V
receiverinputsconnectedtootherdevices.
12. Press
EXIT
tocloseallmenus.
Automatic A/V Receiver Switching, Part 2: Tell the TV
Where Connected Devices Send Audio
•
YoucanassigneachA/Vreceiverinputtoonlyonedevice.
•
MostdevicesaretypicallysetupliketheVCRinthis
example,inwhichanalogaudiofromthedeviceissent
throughtheTVandtheinputsettingisleftatthedefault
settingNone.
Analog Stereo Audio (e.g., analog VCR with audio con-
nected only to the TV: see figure 17)
1. Press
INPUT
todisplaytheInputSelectionmenu.
2. HighlighttheiconfortheVCRandpress
ENTER
toswitch
totheVCRinput.
3. Press
MENU
andopentheNetCommandmenu.
 previous next