Mitsubishi Electronics WD-57831 CRT Television User Manual


  Open as PDF
of 126
 
46 Chapter 3. TV Setup
Additional Setup Using the
NetCommand Menu, continued
IMPORTANT
To hear audio that is sent from the TV to the A/V
receiver, you must have:
•
physically connected the TV to the A/V receiver
•
learned the IR codes for the A/V receiver inputs
• chosenthecorrectinputunderNetCommand
AV RECEIVER SETUP
•
selected the A/V receiver for audio in the Input
Selection menu
4. HighlightthetextboxunderAV RECEIVER SETUP.
5. ConfirmthatthesettingisatNone,thedefault.
ThissettingtellstheTVtoautomaticallytransferVCR
audiototheA/Vreceiver.TheTVconvertsanalog
audiotodigitalforouputtoadigitalA/Vreceiver.
6. Press
EXIT
tocloseallmenus.
Figure 17, left and below. A/V
receiver setup indicating the
analog VCR’s audio output is
automatically sent to the A/V
receiver via the TV’s audio
output.
"73FDFJWFS
%7%BVEJP
JOQVU
57BVEJP
JOQVU
EJHJUBMPS
BOBMPHBVEJP
GSPN57
57BVEJPPVU
7$3XJUI
"OBMPH"VEJP
WJEFP
BOBMPHBVEJP
57BVEJPPVU
EJHJUBMTVSSPVOETPVOE
57
57BVEJPPVU
EJHJUBMTVSSPVOETPVOE
Audio Available from TV Only (see figure 18)
1. Press
INPUT
todisplaytheInputSelectionmenu.
2. Highlighttheiconforanantennainput(
ANT 1
or
ANT 2
)andpress
ENTER
toswitchtotheinput.Select
anantennainputinthisstepevenifyouhaveacable
boxorsatellitereceiverconnectedonthe
HDMI
,
COMPONENT
,or
INPUT
jacks.
3. Press
MENU
andopentheNetCommandmenu.
4. HighlightthetextboxunderAV RECEIVER SETUP.
5. Press tomovethroughthelisttoTV.Thisisthelist
ofA/VreceiverinputsyounamedintheAVReceiver
(AVR)Learnscreen(seefigure15).
TheTVsettinghereindicatesthataudiooutfrom
theTV(
DIGITAL AUDIO OUT
or
AUDIO OUT
LEFT/RIGHT
)issenttotheA/Vreceiver’s
TV
AUDIO
input.Audiofrom
ANT 1
and
ANT 2
,
memorycards,andIEEE1394devicesmustgotothe
A/VreceiverfromtheTV’saudiooutputsasthereis
nowaytosendtheaudiodirectlytotheA/Vreceiver.
6. Press
EXIT
tocloseallmenus.
Figure 18, Left and below. A/V
receiver setup indicating that the
TV’s audio output (
DIGITAL
AUDIO OUT
or
AUDIO OUT
LEFT/RIGHT
) is connected
to the A/V receiver’s TV audio
input.
57
57BVEJPPVU
Digital Surround Sound (see figure 19)
1. Press
INPUT
todisplaytheInputSelectionmenu.
2. HighlighttheiconfortheDVDplayerandpress
ENTER
toswitchtotheDVDinput.
3. Press
MENU
andopentheNetCommandmenu.
4. HighlightthetextboxunderAV RECEIVER SETUP.
5. Press tomovethroughthelisttoDVD.
ThissettingtellstheTVthatdigitalsurroundsound
fromtheDVDplayerisconnecteddirectlytotheA/V
receiver’s
DVD AUDIO
input.
6. Press
EXIT
toclosethescreen.
Figure 19, left and below. A/V
receiver setup indicating the
DVD player’s audio output is
connected directly to the A/V
receiver’s DVD audio input.
57BVEJPPVU
EJHJUBMTVSSPVOETPVOE
 previous next