Mitsubishi Electronics WD-57831 CRT Television User Manual


  Open as PDF
of 126
 
62 Chapter 5. TV Menu Settings
Setup Menu
Seechapter3,“TVSetup,”foruseoftheSetupmenu.
NetCommand Menu
Thefeaturesdescribedinthissectionareavailableevenif
youhavenotperformedNetCommandsetup.Seechapter
3,“TVSetup,”foroptionsavailableforNetCommand-
controlleddevices.
Review TV Connections
(no NetCommand setup required)
Press tohighlightReviewandpress
ENTER
to
displaytheReviewscreen(seefigure2).
Figure 2. The Review screen lists all TV connections.
IEEE 1394 inputs are listed separately on the right.
Input Name Menu
(no NetCommand setup required)
UsetheInputNamemenutoassignusefullabelstothe
TVinputsthatappearintheInputSelectionmenu.See
figures3and4.Thecurrentviewingdeviceandany
unusedinputsappeargrayedoutandunselectableinthe
InputNamemenu.
Icon for the Input Name menu
Icon for the Icon Order menu
Figure 3. The Input Name menu and Icon Order menu are
accessible through the NetCommand menu.
Figure 4. Input Name menu
To rename an input
1. Ifyouarecurrentlywatchingtheinputyouwishto
rename,firstchangetoanotherinput.Todoso,press
INPUT
toopentheInputSelectionmenu,highlightadif-
ferentinput,andpress
ENTER
.
2. WiththeInputNamemenudisplayed,press to
movethehighlighttotheboxfortheinputyouwishto
rename.
3. Press toselectfromthefollowinglist.
Cable Box Game
Camcorder HD Disc
DVD Satellite
DVD2 VCR
DVR(digitalvideo
recorder,recordableDVD)
OnlyoneVCRlabelisavailable,soIfyouhavea
secondVCRconnected,leavethenameasthedefault
name.
To Replace One Device with Another on an Input Jack
1. Disconnectthedeviceyouwishtoremovefromthe
TV.
2. Connectthenewdevicetothevacatedjack.
3. OpentheInputNamemenufromtheNetCommand
menu.
4. Selectadevicenamefromthelistfortheinput.
5. OpentheReviewscreenandconfirmthechange.
To Remove the Icon for an HDMI Device
WhenyoudisconnectanHDMIdevice,theiconremainsin
theInputSelectionmenuuntilyouchoosetoremoveit.
1. IntheInputNamemenu(seefigure4),highlightthe
boxforthedisconnectedHDMIinput.
2. Press
toselectOff.
3. Press
MENU
toreturntotheNetCommandmenuor
press
EXIT
tocloseallmenus.
IMPORTANT
It is possible to use the same name for more
than one input. To avoid confusion, be sure
to use different names for each input.
 previous next