Filter
Top Products
C1695M (8/06) 105
Monitors
If you are an administrator, you can configure a primary and spot monitor. Refer to the following instructions to modify monitor settings:
• Displaying the Monitors Options on page 106
• Selecting the Primary Monitor Format on page 106
• Setting Up the Spot Monitor on page 106
Figure 86. Monitors Tab
The following configuration settings are available for monitors:
• Main Monitor: The Main Monitor area provides options that allow you to configure the primary monitor, and includes the following
options:
•Format
• Overscan Adjust
• Display Date/Time
• Display Name
• Display Alert
• Format: Lists the available monitor formats: VGA, NTSC, PAL.
• Overscan Adjust: Adjusts overscan of the image in relation to the border surrounding the video pane. By default, overscan is set to
10%.
• Spot Monitor: The Spot Monitor area provides the following options:
• Dwell Time
• Interleave Video On Alarm
• Available Cameras
• Cameras In Sequence
•Add
•Remove
• Dwell Time: Selects the time in seconds that video from each selected camera is displayed on the spot monitor.
• Interleave Video on Alarm: Check box that when selected, causes alarm video to be interleaved with normal video displayed on the
spot monitor.
• Available Cameras: List of available cameras that can be added to the sequence.
• Cameras In Sequence: List of cameras that are displayed on the spot monitor.
• Add/Remove: Command buttons that let you add to the sequence list or delete cameras from the sequence list.