Filter
Top Products
C1695M (8/06) 77
DISPLAYING THE GENERAL SECTION CAMERA OPTIONS
TIP: You can use an optional KBD5000 keyboard or a USB PC keyboard and mouse to perform some setup tasks more easily. Refer to
Understanding DVR5100 Controls and Menus on page 31 for a comparison on using any of these devices to work with the on-screen menus.
To access the General section (default view) camera device options:
1. From the main menu, select Setup and press Enter/Shift . The Setup window is displayed.
2. On the Control Pad, use the joystick to select the Devices tab. By default, the General tab is displayed (refer to Camera Configuration:
General Settings on page 75).
3. Press down on the joystick until you have selected a camera. If necessary, press to expand the device tree.
Figure 68. Camera Category
4. In the Device Selection pane, use the jog to select a camera device, for example Camera 01 (#1). The configuration options are displayed in
the Contents pane and the device name is displayed in the Name text box.
MODIFYING A CAMERA NAME
TIP: You can use an optional KBD5000 keyboard or a USB PC keyboard and mouse to perform some setup tasks more easily. Refer to
Understanding DVR5100 Controls and Menus on page 31 for a comparison on using any of these devices to work with the on-screen menus.
To modify a camera name:
1. If it is not already open, display the General section camera device options on the Devices tab of the Setup window. For information about
accessing General section camera device options, refer to Displaying the General Section Camera Options, above.
2. Select the Name text box. Refer to Figure 67 on page 75.
3. Use the Control Pad to modify the device name. The default name for camera 1 is “Camera 01.” Refer to Renaming Devices on page 68 for
additional information.
4. Select Apply to save your changes and continue working with settings on this page. Select OK to save your changes and close
the page. To retain the original settings, select Cancel . The DVR5100 main application window is displayed.