Filter
Top Products
90
3-2-3. Initial screen
The screen mode is Normal/Full screen mode.
Correction point: Vertical 8 * Horizontal 7 (® and - marks
are the adjusting points.)
Fig. 11-4
(1) First screen:
The initial cross hatch screen appears. The pattern col-
ors are displayed with 3 colors. The cursor color is red
and left blinking.
When the modification is carried out, the last memory
status is displayed.
Cursor mode:
Lighting: Data modification mode
Blinking: Cursor move mode
The display color shows the color which can modify
the data.
(2) Second screen
When changing from the first screen to second screen, the
convergence correction waveform is mute for 1 second. The
modified data for this period is sent to Q713 E
2
PROM from
Q071 RAM and then stored.
The second screen is displayed upper left of the first screen,
so the convergence adjustment cannot be carried out when
the second screen is displayed.
Note:
• The adjusted data is automatically stored when the dis-
play changes from the first screen to the second screen.
So be sure to perform this operation after adjustment com-
pletes.
• Adjustment should be carried out with a corresponding
signal received.
1
2
3
4
5
6
78
1
2
3
4
5
6
7
Y
Cursor (Red) (Blinking)
Screen Center
X
X:3
Y:2
C:R
S:FULL
Adjusting point display
X : Horizontal position display
Y : Vertical position display
C : Color display
S : Screen mode display
Data display
Primary screen Secandary screen
Screen frame