Filter
Top Products
R5975228 BARCOVISION 701 MULTIMEDIA 070597
SERVICE MODE
SERVICE MODE
R5975228 BARCOVISION 701 MULTIMEDIA 070597
SERVICE MODE
SERVICE MODE
9-7
9-7
When the displayed password is cor-
rect, press
ENTER
to save.
If not correct, press
EXIT
to cancel
the saving.
CHANGE PASSWORD
Password will be
reprogrammed as XXXX.
<ENTER> to confirm
<EXIT> to cancel
Change Language
The 'Change Language' function of-
fers the possibility to change the
language of the screen menus to :
- English
- Spanish
- French
- German
Highlight
'Change Language'
with
the control disk and press
ENTER
.
Select with or
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
ENTER
saves the entered password.
EXIT
returns without saving.
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
ENTER
selects the Change language
menu.
EXIT
returns to the Service menu.
Select with or
then <ENTER>
<EXIT> to return.
LANGUAGE
ENGLISH
ESPAÑOL
FRANCAIS
DEUTSCH
Push the control disk up or down to
select the desired language and
press
ENTER
to change the lan-
guage.
When the displayed password is cor-
rect, press
ENTER
to save.
If not correct, press
EXIT
to cancel
the saving.
CHANGE PASSWORD
Password will be
reprogrammed as XXXX.
<ENTER> to confirm
<EXIT> to cancel
Change Language
The 'Change Language' function of-
fers the possibility to change the
language of the screen menus to :
- English
- Spanish
- French
- German
Highlight
'Change Language'
with
the control disk and press
ENTER
.
Select with or
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
ENTER
saves the entered password.
EXIT
returns without saving.
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
ENTER
selects the Change language
menu.
EXIT
returns to the Service menu.
Select with or
then <ENTER>
<EXIT> to return.
LANGUAGE
ENGLISH
ESPAÑOL
FRANCAIS
DEUTSCH
Push the control disk up or down to
select the desired language and
press
ENTER
to change the lan-
guage.