Filter
Top Products
APPENDIX C : SOFT EDGE MATCHING
R5975238 BARCOVISION 701 MULTIMEDIA 070497
APPENDIX C : SOFT EDGE MATCHING
APPENDIX C : SOFT EDGE MATCHING
APPENDIX C : SOFT EDGE MATCHING
R5975238 BARCOVISION 701 MULTIMEDIA 070497
C-4
C-4
Start position
Highlight
START POSITION
with
the control disk and press
ENTER
.
ENTER
displays the normal image super-
imposed with the internal generated test
signal.
EXIT
returns to the Random Access Ad-
justment Mode main menu.
ADJUST
returns to the Operational mode.
Adjust the first left line of the gener-
ated test image to determine the
image border. This image border
is the start position of the soft edge
area.
Note : when the start position is not
visible by the first image display,
adjust with the control disk until the
line becomes visible. Adjust then
until the start position is correct.
Start position
Left(width)
415a
ENTER
displays the Soft Edge menu.
SOFT EDGE
CORRECTION
Select with or
then <ENTER>
<EXIT> to return
639a
START
TOP
START LEFT RIGHT STOP
BOTTOM
STOP
H TEST MODE-OFF
V TEST MODE-OFF
Start position
Highlight
START POSITION
with
the control disk and press
ENTER
.
ENTER
displays the normal image super-
imposed with the internal generated test
signal.
EXIT
returns to the Random Access Ad-
justment Mode main menu.
ADJUST
returns to the Operational mode.
Adjust the first left line of the gener-
ated test image to determine the
image border. This image border
is the start position of the soft edge
area.
Note : when the start position is not
visible by the first image display,
adjust with the control disk until the
line becomes visible. Adjust then
until the start position is correct.
Start position
Left(width)
415a
ENTER
displays the Soft Edge menu.
SOFT EDGE
CORRECTION
Select with or
then <ENTER>
<EXIT> to return
639a
START
TOP
START LEFT RIGHT STOP
BOTTOM
STOP
H TEST MODE-OFF
V TEST MODE-OFF