Barco R9000740 Home Theater Screen User Manual


 
CONNECTIONS
CONNECTIONS
CONNECTIONS
CONNECTIONS
R5975238 BARCOVISION 701 MULTIMEDIA 280497
R5975238 BARCOVISION 701 MULTIMEDIA 280497
4-4
4-4
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6
3 4
1 2
Enter ADJUST
- use the control disk to high-
light
1
.
- press
ENTER
to select the
highlighted source.
Connecting a S-Video source.
Separate Y-luma/C-chroma signals for higher quality playback of Super VHS
signals.
COMM PORT
(800 peripherals)
REMOTE
S
VIDEO
S-VIDEO
VCR S-VHS
Audio amplifier
Luma/Chroma
RG(S)B
R-Y
Y(S)
B-Y
RS232 OUT
RS232 IN
If a line doubler is built in :
the default position of this line doubler is ON (active), the video input signal
will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this line doubler function, enter the adjustment mode
and change the position of the ON/OFF toggle switch (see Picture tuning in
chapter 'Guided' adjustment mode or 'Random access' adjustment mode).
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6
3 4
1 2
Enter ADJUST
- use the control disk to high-
light
1
.
- press
ENTER
to select the
highlighted source.
Connecting a S-Video source.
Separate Y-luma/C-chroma signals for higher quality playback of Super VHS
signals.
COMM PORT
(800 peripherals)
REMOTE
S
VIDEO
S-VIDEO
VCR S-VHS
Audio amplifier
Luma/Chroma
RG(S)B
R-Y
Y(S)
B-Y
RS232 OUT
RS232 IN
If a line doubler is built in :
the default position of this line doubler is ON (active), the video input signal
will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this line doubler function, enter the adjustment mode
and change the position of the ON/OFF toggle switch (see Picture tuning in
chapter 'Guided' adjustment mode or 'Random access' adjustment mode).