Filter
Top Products
R5975228 BARCOVISION 701 MULTIMEDIA 070597
SERVICE MODE
SERVICE MODE
R5975228 BARCOVISION 701 MULTIMEDIA 070597
SERVICE MODE
SERVICE MODE
9-15
9-15
ENTER
will set all settings to their
midposition.
EXIT
will cancel the
operation to set all settings to their
midposition.
ALL SETTINGS TO MIDPOSITION
All settings
in current block
wil be overwritten !
<ENTER> to confirm
<EXIT> to cancel
Undo all settings to midpos
When "All settings to midpos" is
selected, all settings are set to their
midposition. To cancel this action,
select 'Undo all settings to midpos'
by pushing the control disk up or
down and press ENTER. 'Undo all
settings to Midposition' is displayed
in the Memory management menu
in stead off 'All settings to
midposition' when this latter is
pressed.
An undo is possible as long as the
projector is playing on the same
source (= same adjustment block)
even when some adjustments as
geometry or convergence are al-
ready readjusted. When undo is
presssed all settings are reset to
the previous settings.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
R & B convergence mid
Item is password protected.
Highlight
'R & B convergence mid'
with the control disk and press
ENTER
to set all convergence set-
tings to their midposition. A confir-
mation screen will be displayed
first.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
ENTER
will set all settings to their
midposition.
EXIT
will cancel the
operation to set all settings to their
midposition.
ALL SETTINGS TO MIDPOSITION
All settings
in current block
wil be overwritten !
<ENTER> to confirm
<EXIT> to cancel
Undo all settings to midpos
When "All settings to midpos" is
selected, all settings are set to their
midposition. To cancel this action,
select 'Undo all settings to midpos'
by pushing the control disk up or
down and press ENTER. 'Undo all
settings to Midposition' is displayed
in the Memory management menu
in stead off 'All settings to
midposition' when this latter is
pressed.
An undo is possible as long as the
projector is playing on the same
source (= same adjustment block)
even when some adjustments as
geometry or convergence are al-
ready readjusted. When undo is
presssed all settings are reset to
the previous settings.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
R & B convergence mid
Item is password protected.
Highlight
'R & B convergence mid'
with the control disk and press
ENTER
to set all convergence set-
tings to their midposition. A confir-
mation screen will be displayed
first.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID