Filter
Top Products
GUIDED ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
GUIDED ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
7-4
GUIDED ADJUSTMENT MODE
7-4
GUIDED ADJUSTMENT MODE
Selecting Setup Pattern
If an external source is con-
nected to the projector, the
Setup pattern menu will be dis-
played. Push the control disk
up or down to highlight the
desired setup pattern and then
press
ENTER
.
Genlocked pattern : internally
generated cross hatch pattern,
locked on the external source.
Internal # pattern : internally
generated cross hatch pattern
and locked on internal gener-
ated sync signals. (No external
source necessary)
Choose
a setup pattern
from below:
Select with or
then <ENTER>
<EXIT> to return
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
source 1
ENTER
continues to Guided Adjustment
Mode or Internal # Pattern Selection
EXIT
returns to Path Selection
ADJUST
returns to operational mode
If no external source is con-
nected to the projector, the in-
ternal cross hatch pattern menu
will be displayed.
The menus in this manual are
created for an external source,
connected to one of the inputs,
and the 'Genlocked pattern' is
selected.
Selecting Setup Pattern
If an external source is con-
nected to the projector, the
Setup pattern menu will be dis-
played. Push the control disk
up or down to highlight the
desired setup pattern and then
press
ENTER
.
Genlocked pattern : internally
generated cross hatch pattern,
locked on the external source.
Internal # pattern : internally
generated cross hatch pattern
and locked on internal gener-
ated sync signals. (No external
source necessary)
Choose
a setup pattern
from below:
Select with or
then <ENTER>
<EXIT> to return
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
source 1
ENTER
continues to Guided Adjustment
Mode or Internal # Pattern Selection
EXIT
returns to Path Selection
ADJUST
returns to operational mode
If no external source is con-
nected to the projector, the in-
ternal cross hatch pattern menu
will be displayed.
The menus in this manual are
created for an external source,
connected to one of the inputs,
and the 'Genlocked pattern' is
selected.