Barco R9000740 Home Theater Screen User Manual


 
R5975238 BARCOVISION 701 MULTIMEDIA 070497
APPENDIX D : CONTRAST MODULATION
APPENDIX D : CONTRAST MODULATION
R5975238 BARCOVISION 701 MULTIMEDIA 070497
APPENDIX D : CONTRAST MODULATION
APPENDIX D : CONTRAST MODULATION
D-3
D-3
The first 3 adjustments (horizontal
red, green and blue) are used for
horizontal light equalisation for the
three specific colors separately.
This compensates the error due to
the different horizontal position of
the picture tubes. One side of the
image is reddish and the other side
is blueish. This phenomenon is
called
Color shift
.
The
VERTICAL
adjustment affects
the three colors at the same time
and corrects the vertical error in
light output due to the projection
angle (10.5 degrees).
Left-right (horizontally) and top-
bottom (vertically) adjustments
improve the '
hot spot
' in the center
of the screen.
CONTRAST
EQUALISATION
Select with or
then <ENTER>
<EXIT> to return
RED HORIZONTAL
GREEN HORIZONTAL
BLUE HORIZONTAL
VERTICAL
338
LEFT-RIGHT
TOP-BOTTOM
CONTRAST
EDGE CORRECTION
Contrast equalisation ('Color Shift')
Highlight
RED HORIZONTAL
with
the control disk and press
ENTER
.
Only a red image is displayed. Use
the control disk to equalise the light
output on the left and right side of
the image. The best result is ob-
tained on a white image by looking
on the left and the right side until
both or equal, or by using a very
sensitive light meter.
ENTER
returns to the Contrast
Modulation menu.
Repeat this adjustment for green
and blue by selecting first Green
horizontal and then Blue horizon-
tal.
Remark : When the end of adjust-
ment range is reached for red and
blue, the green image will be dis-
played too, to give you the mes-
sage 'end of adjustment range'.
The green image remains active
until a new selection is made.
CONTRAST
EQUALISATION
Select with or
then <ENTER>
<EXIT> to return
338a
LEFT-RIGHT
TOP-BOTTOM
CONTRAST
EDGE CORRECTION
RED HORIZONTAL
GREEN HORIZONTAL
BLUE HORIZONTAL
VERTICAL
ENTER
displays the red image.
EXIT
returns to the Random Access Ad-
justment Mode main menu
ADJUST
returns to the Operational mode.
The first 3 adjustments (horizontal
red, green and blue) are used for
horizontal light equalisation for the
three specific colors separately.
This compensates the error due to
the different horizontal position of
the picture tubes. One side of the
image is reddish and the other side
is blueish. This phenomenon is
called
Color shift
.
The
VERTICAL
adjustment affects
the three colors at the same time
and corrects the vertical error in
light output due to the projection
angle (10.5 degrees).
Left-right (horizontally) and top-
bottom (vertically) adjustments
improve the '
hot spot
' in the center
of the screen.
CONTRAST
EQUALISATION
Select with or
then <ENTER>
<EXIT> to return
RED HORIZONTAL
GREEN HORIZONTAL
BLUE HORIZONTAL
VERTICAL
338
LEFT-RIGHT
TOP-BOTTOM
CONTRAST
EDGE CORRECTION
Contrast equalisation ('Color Shift')
Highlight
RED HORIZONTAL
with
the control disk and press
ENTER
.
Only a red image is displayed. Use
the control disk to equalise the light
output on the left and right side of
the image. The best result is ob-
tained on a white image by looking
on the left and the right side until
both or equal, or by using a very
sensitive light meter.
ENTER
returns to the Contrast
Modulation menu.
Repeat this adjustment for green
and blue by selecting first Green
horizontal and then Blue horizon-
tal.
Remark : When the end of adjust-
ment range is reached for red and
blue, the green image will be dis-
played too, to give you the mes-
sage 'end of adjustment range'.
The green image remains active
until a new selection is made.
CONTRAST
EQUALISATION
Select with or
then <ENTER>
<EXIT> to return
338a
LEFT-RIGHT
TOP-BOTTOM
CONTRAST
EDGE CORRECTION
RED HORIZONTAL
GREEN HORIZONTAL
BLUE HORIZONTAL
VERTICAL
ENTER
displays the red image.
EXIT
returns to the Random Access Ad-
justment Mode main menu
ADJUST
returns to the Operational mode.