Filter
Top Products
CONNECTIONS
CONNECTIONS
CONNECTIONS
CONNECTIONS
R5975238 BARCOVISION 701 MULTIMEDIA 280497
R5975238 BARCOVISION 701 MULTIMEDIA 280497
4-8
4-8
Connecting a Component source.
(R-Y)Y(B-Y) analog input terminals with sync input or with sync on the luminance
(Y) input. The projector detects automatically where the sync signal is located.
Line doubling is possible for component video input sources on standard line
frequency.
If a line doubler is built in :
the default position of this line doubler is ON (active), the component video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this line doubler function, enter the adjustment mode and
change the position of the ON/OFF toggle switch (see Picture tuning in chapter
'Guided' adjustment mode or 'Random access' adjustment mode).
COMM PORT
(800 peripherals)
REMOTE
SVIDEO
S-VIDEO
Professional VCR
Audio amplifier
RG(S)B
R-Y
Y(S)
B-Y
RS232 OUT
RS232 IN
(R-Y)Y(B-Y)S or(R-Y)Ys(B-Y) input selection
a. Press digit button 5 on the RCU or
b. With the local keypad :
(to gain access to the local keypad, see Local keypad in chapter Location and
functions of control.)
- Press
ADJUST
key, the General access menu is displayed on the screen.
Connecting a Component source.
(R-Y)Y(B-Y) analog input terminals with sync input or with sync on the luminance
(Y) input. The projector detects automatically where the sync signal is located.
Line doubling is possible for component video input sources on standard line
frequency.
If a line doubler is built in :
the default position of this line doubler is ON (active), the component video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this line doubler function, enter the adjustment mode and
change the position of the ON/OFF toggle switch (see Picture tuning in chapter
'Guided' adjustment mode or 'Random access' adjustment mode).
COMM PORT
(800 peripherals)
REMOTE
SVIDEO
S-VIDEO
Professional VCR
Audio amplifier
RG(S)B
R-Y
Y(S)
B-Y
RS232 OUT
RS232 IN
(R-Y)Y(B-Y)S or(R-Y)Ys(B-Y) input selection
a. Press digit button 5 on the RCU or
b. With the local keypad :
(to gain access to the local keypad, see Local keypad in chapter Location and
functions of control.)
- Press
ADJUST
key, the General access menu is displayed on the screen.