Filter
Top Products
START UP OF THE ADJUSTMENT MODE
START UP OF THE ADJUSTMENT MODE
START UP OF THE ADJUSTMENT MODE
START UP OF THE ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
R5975238 BARCOVISION 701 MULTIMEDIA 070497
6-4
6-4
Note : to adjust the Analog picture control while in the 'Adjustment mode', press
the
ADJUST
key. The next General Access menu will be displayed.
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
quit ADJUST
643
Push the control disk up or
down to select the analog con-
trol to be adjusted and press
the
ENTER
key to confirm.
When the analog control is
adjusted the projector returns
automatically to the General
access menu. When you want
to return to the Adjustment
mode, press
EXIT
, otherwise
select
quit ADJUST
and press
ENTER
to return to operational
mode.
You are now in the
'Adjustment mode'
. The control disk is used to make menu
selections and also vertical and horizontal adjustments. The
ENTER
and
EXIT
keys are used to move forward and backward through the menu structure. The
ADJUST
key can be used to terminate the adjustment mode while a path
selection menu (head menu) is displayed.
There are 5 possible paths to follow once in the Adjustment mode. They are :
INSTALLATION
- Installation
should be selected if the pro-
jector has been relocated and/
or a different screen size is
desired.
When selecting 'Installation',
the user or operator will be
warned to call a qualified tech-
nician to perform the installa-
tion procedure (see example
of projected warning on next
page).
ADJUSTMENT MODE
Select a path from
below:
Select with or
then <ENTER>
<EXIT> to return
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
source 1
GUIDED
- Guided should be selected if the user intends to perform a complete
alignment of the projected image. All of the necessary geometry and conver-
gence adjustments are made in a predetermined sequence.
RANDOM ACCESS
- Random Access should be selected if the user intends to
make only a few adjustments.
SERVICE
- Service should be selected if the user intends to delete blocks, change
password or apply information.
IRIS
- This selection will only be available when the autoconvergence unit IRIS
is connected to the projector.
Note : to adjust the Analog picture control while in the 'Adjustment mode', press
the
ADJUST
key. The next General Access menu will be displayed.
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
quit ADJUST
643
Push the control disk up or
down to select the analog con-
trol to be adjusted and press
the
ENTER
key to confirm.
When the analog control is
adjusted the projector returns
automatically to the General
access menu. When you want
to return to the Adjustment
mode, press
EXIT
, otherwise
select
quit ADJUST
and press
ENTER
to return to operational
mode.
You are now in the
'Adjustment mode'
. The control disk is used to make menu
selections and also vertical and horizontal adjustments. The
ENTER
and
EXIT
keys are used to move forward and backward through the menu structure. The
ADJUST
key can be used to terminate the adjustment mode while a path
selection menu (head menu) is displayed.
There are 5 possible paths to follow once in the Adjustment mode. They are :
INSTALLATION
- Installation
should be selected if the pro-
jector has been relocated and/
or a different screen size is
desired.
When selecting 'Installation',
the user or operator will be
warned to call a qualified tech-
nician to perform the installa-
tion procedure (see example
of projected warning on next
page).
ADJUSTMENT MODE
Select a path from
below:
Select with or
then <ENTER>
<EXIT> to return
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
source 1
GUIDED
- Guided should be selected if the user intends to perform a complete
alignment of the projected image. All of the necessary geometry and conver-
gence adjustments are made in a predetermined sequence.
RANDOM ACCESS
- Random Access should be selected if the user intends to
make only a few adjustments.
SERVICE
- Service should be selected if the user intends to delete blocks, change
password or apply information.
IRIS
- This selection will only be available when the autoconvergence unit IRIS
is connected to the projector.