Filter
Top Products
GUIDED ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
GUIDED ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
7-20
GUIDED ADJUSTMENT MODE
7-20
GUIDED ADJUSTMENT MODE
Convergence Adjustment
Convergence adjustments af-
fect both the horizontal and
vertical lines of the setup pat-
tern. These adjustments are
performed on the red image
while superimposed on the
green image and then on the
blue image while superim-
posed on the green image.
The screen area is divided into
25 areas. Within each area it is
possible to move the horizon-
tal and vertical lines of the red
and blue picture until they co-
incide with the green lines.
Use the control disk to make
horizontal and vertical conver-
gence adjustments in the area
indicated by the box. Pressing
ENTER will move the box to
the next area of the setup pat-
tern to be converged. Press-
ing EXIT will move the box back
to the last area.
CONVERGENCE
<ENTER> to continue
<EXIT> to return
START WITH GREEN ONLY,
THEN RED ON GREEN,
THEN BLUE ON GREEN.
USE THE ARROW KEYS FOR
HORIZONTAL AND VERTICAL
ADJUSTMENTS IN THE AREA
INDICATED BY THE BOX.
<ENTER> WILL MOVE
THE BOX TO THE NEXT AREA
TO BE CONVERGED, AND
<EXIT> WILL MOVE IT BACK
TO THE PREVIOUS.
CONVERGE
ADJUSTMENT
70
12345
8
9
6
7
15
10
23
12
1820
21 19 11 13
24
22
14
16
25
17
397
The ‘guided adjustment’ program will start with the convergence adjustment of
the red picture on the green and continues with the blue image on the green
image.
Attention : when green convergence adjustments are available (option). The
control software starts with these green corrections (the menu will indicate it also).
Adjust until the vertical and horizontal lines are straight.
red image
green image
Convergence Adjustment
Convergence adjustments af-
fect both the horizontal and
vertical lines of the setup pat-
tern. These adjustments are
performed on the red image
while superimposed on the
green image and then on the
blue image while superim-
posed on the green image.
The screen area is divided into
25 areas. Within each area it is
possible to move the horizon-
tal and vertical lines of the red
and blue picture until they co-
incide with the green lines.
Use the control disk to make
horizontal and vertical conver-
gence adjustments in the area
indicated by the box. Pressing
ENTER will move the box to
the next area of the setup pat-
tern to be converged. Press-
ing EXIT will move the box back
to the last area.
CONVERGENCE
<ENTER> to continue
<EXIT> to return
START WITH GREEN ONLY,
THEN RED ON GREEN,
THEN BLUE ON GREEN.
USE THE ARROW KEYS FOR
HORIZONTAL AND VERTICAL
ADJUSTMENTS IN THE AREA
INDICATED BY THE BOX.
<ENTER> WILL MOVE
THE BOX TO THE NEXT AREA
TO BE CONVERGED, AND
<EXIT> WILL MOVE IT BACK
TO THE PREVIOUS.
CONVERGE
ADJUSTMENT
70
12345
8
9
6
7
15
10
23
12
18
20
21 19
11
13
24
22
14
16
25
17
397
The ‘guided adjustment’ program will start with the convergence adjustment of
the red picture on the green and continues with the blue image on the green
image.
Attention : when green convergence adjustments are available (option). The
control software starts with these green corrections (the menu will indicate it also).
Adjust until the vertical and horizontal lines are straight.
red image
green image