Filter
Top Products
RANDOM ACCESS ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
RANDOM ACCESS ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
8-22
RANDOM ACCESS ADJUSTMENT MODE
8-22
RANDOM ACCESS ADJUSTMENT MODE
Vertical Size Adjustment
Push the control disk up or
down to highlight
V SIZE
on
the Geometry menu and then
press
ENTER
.
GEOMETRY
Select with or
then <ENTER>
<EXIT> to return
H PHASE
RASTER SHIFT
LEFT - RIGHT (E-W)
TOP - BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
ENTER
will select vertical size adjustment
EXIT
returns to random access adjustment
mode menu,.
ADJUST
returns to operational mode
V SIZE
70
Adjust the vertical size by push-
ing the control disk up or down
until the exact image height is
obtained.
Note :
- If the internal # pattern was selected, this
pattern remains on the screen.
- If the genlocked pattern was selected, the
external source will be displayed.
A bar scale and a number indicator give a
visual indication of the vertical size adjust-
ment.
Hint : In order to avoid loss of resolution in the
projected image and to ensure maximum CRT
longevity, do not use an excessively small
vertical size setting.
EXIT
will return to Geometry.
Image too
tall
Image too
short
Vertical Size Adjustment
Push the control disk up or
down to highlight
V SIZE
on
the Geometry menu and then
press
ENTER
.
GEOMETRY
Select with or
then <ENTER>
<EXIT> to return
H PHASE
RASTER SHIFT
LEFT - RIGHT (E-W)
TOP - BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
ENTER
will select vertical size adjustment
EXIT
returns to random access adjustment
mode menu,.
ADJUST
returns to operational mode
V SIZE
70
Adjust the vertical size by push-
ing the control disk up or down
until the exact image height is
obtained.
Note :
- If the internal # pattern was selected, this
pattern remains on the screen.
- If the genlocked pattern was selected, the
external source will be displayed.
A bar scale and a number indicator give a
visual indication of the vertical size adjust-
ment.
Hint : In order to avoid loss of resolution in the
projected image and to ensure maximum CRT
longevity, do not use an excessively small
vertical size setting.
EXIT
will return to Geometry.
Image too
tall
Image too
short